Advanced Temperature Control , Furnace Brazing Furnace , Energy Saving
This mesh belt continuous gas aluminum brazing furnace is mainly used for aluminum and iron, stainless steel and aluminum plate, copper etc, . After such equipment treatment, the product surface becomes bright without oxidation.
The furnace boasts stylish design, rational structure, energy saving, high heat efficiency, stable production quality, safe and easy use, not generating industrial pollution.
Advanced temperature control manners: Intelligent thermostat and silicon controlled rectifier ensure temperature control precision of ±1℃. It’s advanced, reliable, practicable and cost effective as an industrial furnace.
The degreasing furnace is heated by natural gas or electricity. The oil on the core will be removed by stir fan through circulating hot air. During this process, the lubricating oil will be evaporated,then burning in the incinerator. The temperature control of this furnace is adjusted by PID. Within the width of mesh-belt, the temperature uniformity will be within ±10.
The final exhaust gas is below 300°C, the screw blades are designed in the muffle to acieve dwell time (1s at least) and 95% splitting efficiency. Before entering the combustion chamber, the exhaust gas from degreasing furnace must be transferred by heat exchanger, and the temperature of exhaust gas after heat exchange is not lower than 400°C. The heat efficiency is more than 50%.
The pre-heating furnace is connected to the inlet curtain box and heated by natural gas. Within the width of whole belt, the furnace temperature uniformity will be within ±5°C(Based on the same section of the moving section). The temperture divation of core will be within ±2°C.
Product Tags:
|
|
Energy Saving Furnace Brazing Furnace With Advanced Temperature Control Images
|
